Specifications

HIGH-COLLAR WAISTCOAT APRON is mainly used for the protection from X-ray. 
lead equivalent:0.5mmPb 
ISO9001/ISO13485/CE 

The medical high-collar waistcoat apron is made from crude rubber and litharge lead oxide yellow. They are processed and packed in wrapping cloth.

The lead equivalent:  0.5mmPb.

The high-collar Waistcoat Apron are mainly used for the protection from X-ray.

The customers can choose the high-collar waistcoat apron of different specifications according to their needs.

It is applicable to the protection from X-ray in the medical treatment organizations.

Before operation, the operator should check the surface packing cloth(inner and outer) of the high-collar waistcoat apron whether it is firm or not,check whether the connection of the fittings is firm, check whether the attenuation equivalent on the mark is suitable to the operator. After the examination, put on the high-collar waistcoat apron on your body.Then start the operation.

ATTENTION:

1, After the operation, lay the high-collar waistcoat apron flat or hang them up by coat hangers to avoid breach caused by a long-time fold and avoid radial leak.

2, If the surface of the high-collar waistcoat apron is dirty, firstly scrub away by banister brush with liquid of lower density or a little amount of washing powder, then wash with clean water and directly airing it at a well ventilated place.

3. When storing the high-collar waistcoat apron, put them in the well airy room where untouched the sun shine and far away from the heat source. Must not touch with the acid or alkali chemical products to ensure the service life of them.

4, According to the standard of GB16757-1997, the service life of the high-collar waistcoat apron is 4-5 years. The user should have a regular examination to them. The examination method is to fondle or bend the clothing by hand and check it by eyes. If the crackle of the high-collar waistcoat apron exceeds one third of it, the high-collar waistcoat apron can not be used any more, must be discarded or renewed.

Specifications

PD11-2 Protective Mask 
Type B 0.1mmPb 
Lead mask can efficaciously prevent the getting through of the X-ray. 

 PD11-2 Operation Manual of Ray Protective Mask

[Main Structure of the Product]

    The protective mask is made of lead organic materials.

[Performance]

    The lead equivalent is not less than 0.1 mmPb.

[Application of the Product]

    The protective mask is used to protect the face and eyes from the radialization from X-ray and other radials.

[Applicability]

    This product is suitable for the applied fields of radiology, interventional iatrology, nuclear iatrology and atomic energy.

[Usage]

    1.Knob A: it is situated behind the head hoop and locked at ordinary times. Only when you press it to the bottom, can you rotate it and adjust the size of it. When you loosen the knob, it can return to the locked state.

     2.The two functions of knob B:

        (1)Loosen the knob B, it can move horizontally along the sliding groove to adjust the distance between the mask and the face. When the user wearing the mask and the room temperature is too low, the gases he breathed out can coagulate on the mask. Then he should adjust the distance to the most position.

        (2)Adjust the degree of tightness of the knob B reasonably, then the user can put up or down the mask optionally and make it stop at any position that he needs.

    3.Snap fastener: it is used to adjust the depth of the head hoop. There are seven positions for choice.

    4.Pad: it is used to lighten the head hoop’s pressure to the forehead and make the wearer feel more comfortable. It can be washed by water.

[Attention]

    The protective mask should not touch with the hard objects for fear to form nicks and make the diaphaneity fall. When you put down the mask, your hands should touch the part of the head hoop and not touch the mask.

[Storage]

     Store the protective mask in the cool and well airy room with the relative humidity not more than 80% and without corrosive gas.